Gutters & Drainage
Seamless aluminium run on site to the exact length of each fascia. Hidden hangers every two feet, correct fall to the outlets, and downpipes that discharge away from the foundation.
The cheapest part of the roof, and the one that ruins foundations
A gutter has one job: catch what the roof sheds and carry it away from the building. When it fails, the water does not simply spill — it runs down the fascia, soaks the soffit, freezes at the eaves in winter and settles into the ground exactly where you least want it. Most of the basement damp we get called about started as a blocked outlet six metres in the air.
We run seamless aluminium, formed on site to the exact length of each fascia, so the only joints in the entire system are at corners and outlets. Hidden hangers go in every two feet rather than every three, because sagging is what breaks fall, and fall is the whole point.
.webp)
What you actually receive
- Seamless runs formed on site — joints only at corners and outlets
- Hidden hangers at two-foot centres, screwed into the fascia board rather than nailed
- Fall set and water-tested with a hose before the crew packs up
- Downpipes discharging clear of the foundation, with extensions where the ground runs the wrong way
Where the price actually moves
Linear footage sets the floor and almost nothing else. Height decides the equipment. Profile and gauge decide how the system handles a genuine downpour — six-inch on a large or steep roof is not an upsell, it is arithmetic. Rotted fascia found behind the old gutter is the common surprise, and guards are worth it under trees and largely wasted everywhere else. We will tell you which situation you are in.
We test every run with a hose before we leave. A gutter that looks level and drains backwards is worse than no gutter at all.
Related Our Services
We remove worn-out roofing and install a durable new system built to restore protection, improve curb appeal, and keep your home secure for years.
From leaks and damaged shingles to flashing issues, we provide dependable repairs that address the problem quickly and help prevent further damage.
We assess storm and hail damage carefully, then provide targeted repairs to restore your roof and protect your home from future weather.
Our detailed inspections uncover signs of wear, leaks, and hidden damage so you can understand your roof’s condition and plan with confidence.
Frequently Asked Questions
Most homes are dried in on day one and finished within three. Weather is the only real variable, and we will not open a roof we cannot close again the same day.
If the damage is storm or hail related, usually yes. We document the roof the way an adjuster needs to see it, file alongside you, and meet the adjuster on the roof so nothing gets quietly trimmed from the scope.
Every estimate states a decking allowance up front, so rotten sheathing is priced before we start rather than discovered afterwards. We photograph every board we replace and only charge for what is actually swapped.
Yes. Twelve months interest-free for deductibles and smaller repairs, or terms up to twelve years for full replacements. Approved storm claims usually mean you pay the deductible only and we invoice your insurer directly.
Two warranties, both registered before we leave. The manufacturer covers the materials, and our own workmanship warranty covers the installation itself — including flashing, penetrations and the ventilation work.
About a third of our work is commercial or multi-family, most of it over occupied buildings. Flat and low-slope membrane, standing-seam metal, phased scheduling and night work where tenants cannot be disturbed.
Let’s get up there and have a look
Free inspection, a photographed report, and a fixed quote inside twenty-four hours. No pressure, no call-backs from a sales team.